6 Gal. Merc Fuel Tank Decal
Instructions

Surface Preparation: 

1. All surfaces must be considered dirty and should be cleaned prior to the application of decals.  (Remove all oil, grease, gasoline and solvents.)

2. Freshly painted surfaces must be dried two weeks prior to application.

Temperature Requirements:

Air and application surface temperature must be above 60 deg. F.

Application Instructions

1. Add a few drops of mild dishwashing liquid to one cup of lukewarm water and mix.

2. Wet surface of application with soapy solution.

3. Remove liner and slide decal on to soapy surface and position.

4. Using firm squeegee pressure, begin at center and work outward to edge to remove all moisture.

5. Apply dry towel to wipe excess moisture.

6. Repeat several times until decal adheres to surface.

Back to Decals Page