| Click to View Larger |
Part Number |
Description |
Price |
Click Below to Purchase |
|
 |
20171 |
Original
Style starter handle for green tank and KD models. |
$18.36 |
|
|
 |
20662 |
Original
Style starter handle for 1953-58 remote tank models. |
$15.95 |
|
|
 |
20172 |
Aluminum
insert used with above starter handles where 1/4" starter ropes are used.
|
$8.95 |
|
|
 |
50-12066T9 |
Braided nylon rewind starter rope - fits all rewind
starters 1941 to 1975 except
KE3, KF3, KF5, Mark 5, Mark 6 & Mark 6A. |
$5.64 |
|
|
 |
28747 |
New Old Stock starter handle used on many models 1959-77. |
$10.50 |
|
|
 |
28748 |
New Old Stock handle insert used on many
models 1959-77. Can purchase part # 79470A1 (below) |
n/a |
No Longer Available |
|
 |
30782 |
Starter Pull Handle used on many models 1961-77. |
$8.66 |
|
|
 |
47341A11 |
1/4"
braided nylon starter rope with wood handle, suitable for any Merc without a recoil starter. |
$8.24 |
|
|
 |
50-90892A2 |
Replacement braided nylon starter rope for
1976-81 Merc 2 cylinder 4 HP.
|
$8.12 |
|
|
 |
79470A1 |
Replacement starter handle with retainer
insert. |
$14.07 |
|
|
 |
23083 |
Reproduction
casting of original 1955-56 Mark 55 emblem. (Finishing will be
necessary.) |
$25.60 |
|
|
 |
23098 |
Reproduction
casting of original 1955 Mark 25 emblem. (Finishing will be necessary.) |
$25.60 |
|
|
 |
25460 |
Reproduction
casting of original 1956 Mark 30 emblem. (Finishing will be
necessary.) |
$25.60 |
|
 |
10-25619 |
Reproduction Cowl Knob
Casting. Can be used on any 4 or 6 cyl model that uses a screw thread
knob. |
|
Sold Out! |
|
 |
24324-1 |
Original
style tiller handle grip for pre-war models. |
$18.70 |
|
|
 |
24324-2 |
Original
style tiller handle for 1946-49 models. |
$18.70 |
|
|
 |
24324-3 |
Original
style tiller handle grip for 1950-54 models without twist-grip throttle.
|
$18.70 |
|
|
 |
25606 |
Red plastic
tilt tube cap used on 40 cu. in. & larger models 1956-60.
|
$.80 |
|
 |
20721 |
Rubber
bumpers used on many models from 1953-61 to stop cowl to cowl vibration. PACKAGE
OF SIX.
|
Six/
$3.90 |
|
 |
10-22484 |
Starter
screw (rear). Used on KE7, KF3,
KF7, KG4, KG7, KH7, and early KE4. |
$.40 |
|
|
 |
10-24636K |
Starter screw kit contains 1 10-22484 (rear) and 2
10-24636 (front) screws. Used on KG7, KF7, KE7, KG4, KH7, KG4H, and KG7H. |
$2.40 |
|
 |
10-24645K |
Starter screw kit contains 1 10-22390 (rear) and 2
10-24645 (front) screws. Used on KF3, KF5, and Mark 5. |
$1.75 |
|
 |
10-24646K |
Starter screw kit contains 1 10-22390 (rear) and 2
10-24646 (front) screws. Used on later KE4 and KE4A. |
$1.75 |
|
 |
10-24640 |
Exact
duplicate 1/4 X 28 Phillips Truss Head Cowl Screw used on KE3, KE4, KG4,
KE7, & Mark 7. |
$.40 |
|
|
 |
10-25918 |
Correct style slotted hex head stainless steel
screws for front of starboard cowl (2 per engine) on Mark 15, Mark 20,
Mark 20H, Mark 25 and Mark 25E. |
$1.05 each |
|
|
 |
20485 |
Stamped reproduction
of cover over recoil nut on 4 & 6 cyl. models 1954-58.
|
$10.45 |
|
|
 |
21635 |
Reproduction casting of recoil nut cover for
KF9 with accessory recoil starter, KG9 with recoil starter, Mark 40, Mark 40H and Wizard Models
WH6, WH6A, WF4, WG4, WF7, WG7, WH7, WJ7, WK7, WM7, WM7A, WG7A, WN7, &
WN7A. May need minor filing for fit and sanding outer surface to
desired finish. |
$20.00 |
|
|
 |
22942 |
Reproduction casting of starter nut cover for 1955-58 Mark
25 and 1955-56 Mark 25E.. |
$12.30 |
|
|
 |
26800 |
Reproduction casting of starter nut cover. Fits Mark 10,
10A, 15A.. |
$9.50 |
|
|
 |
28041 |
Reproduction casting of starter nut cover for Mark 28A, 1960-63 Merc
100, 150, 200, 250 |
$9.50 |
|
|
 |
89096 |
Starter Nut Cover - Fits Some 1961 to 1966 Merc 39, Merc
60, Merc 110
|
$9.50 |
|
|
 |
23374 |
0 - 15
psi Fuel Pressure Gauge for KF9 & KG9 models. New, made by original
manufacturer. |
$27.50 |
No Longer Available |
|
 |
23298-A |
Original
style aluminum choke knob for most models 1949-55. |
$2.95 |
|
|
 |
20663-1 |
Original style aluminum choke knob for KF9.
Painted red. |
$20.99 |
|
|
 |
20663-2 |
Original
style aluminum choke knob for KG9 and manual start 4 cylinder models 1953-55.
|
|
Temporarily Unavailable |
|
 |
20663-3 |
Original
style aluminum choke knob for manual start 4 cylinder models 1956-58.
|
$16.25 |
|
|
 |
20663-4 |
Original style aluminum choke knob for 1959 &
newer manual start 4 cylinder
models. |
$16.25 |
|
|
 |
23298-P |
Original
style plastic choke knob for most models 1947-48. |
$12.95 |
|
|
 |
36-23338A1 |
Reproduction
plastic fuel cap & aluminum vent screw. Fits all green tank models with large hex filter base.
Includes gas cap gasket and vent screw gasket. Safety chain parts sold separately, see below. |
$32.00 |
Temporarily Unavailable |
|
 |
36-21317A2 |
Reproduction
plastic fuel cap with aluminum vent screw. Fits 1941 models
except KB2, all 1946 models, and early green tank models with small
brass fuel line fitting going directly into the underside of the fuel tank
(no large hex filter base.) Includes gas cap gasket and vent screw
gasket. Safety chain parts sold separately, see below. |
$32.00 |
Temporarily Unavailable |
 |
36-23589A 2 |
Complete
package of gas cap safety chain parts for any green tank Merc.
|
$9.00 |
|
 |
10-23339 |
*Aluminum vent screw only* with gasket for use
with 36-23338A1 and 36-21317A2 gas caps listed above. (Vent screw is
also included with purchase of cap.) Reproduction. |
$14.40 |
|
 |
27-23331 |
*Gasket only* for above gas caps (also included
with purchase of cap.) |
$2.35 |
|
|
 |
24107A 1 |
Exact reproduction of original steering bar
for KE7, KF7, KG7, & KG4 service engines. Bright Silver Powder-coated
finish. |
$60.00 |
|
|
 |
20892A 1 |
Reproduction steering bar for engines equipped
with Quicksilver lower units. Bright Silver Powder-coated finish. |
$72.00 |
|
|
 |
1028A 1 |
Remote throttle hookup parts kit for KE7, KF7, KG7, KG4, and KH7, with or without racing lower unit.
Cast Reproductions. |
$27.95 |
|
|
 |
34152A3 |
Cable & Pulley steering connector for 1963-1965 Merc 350. |
$13.45 |
|
|
 |
20980 |
Mark 20H Spark Advance Knob. Hard plastic knob with threaded insert |
$4.00 |
|
|
 |
23987 |
Reproduction stop button cover used on KF9, KG9, Mark 40, Merc 100, Merc
150, early Merc 200, & Merc 250 |
$6.00 |
Temporarily Unavailable
|
|
 |
38950A1 |
Replacement rubber stop button cover with metal insert
used on many 6 to 50 HP models 1961-75.
(Spring & contact sold separately, see below.) |
$11.05 |
|
|
 |
24-30858A1 |
Spring & contact for stop button (above) used
on many 6 to 50 HP models 1961-71. |
$8.65 |
|
|
 |
87-99525A1 |
Stop button used on many models from the 1 cyl.
4 HP to 50 HP models in the 1975 to 1989 range. |
$3.72 |
|
|
 |
23917 |
Reproduction black forward knob for Mark 6 & 6A.
(Painted Aluminum) |
$13.50 |
|
|
 |
23918 |
Reproduction red neutral knob for Mark 6 & 6A.
(Painted Aluminum) |
$13.50 |
|
|
 |
30747 |
Replacement shift handle for 3.9 HP, 6 HP and 9.8 HP
models 1961 to 1965 |
|
No Longer Available |
|
 |
59107 |
Replacement shift handle for late 1966 thru 1968 3.9HP, 1969 thru 1973 4HP,
1966 thru 1973 7.5HP, 1966 thru 1968 9.8HP, and 1966 thru 1973 20HP
models. |
$6.63 |
|
|
 |
93730 |
Shift lever for 1 cyl 4 and 4.5 HP models 1974 thru 1979, 7.5 & 9.8 models
1974 thru 1985, and 20HP models 1974 thru 1975 (This is an updated
style. Your original handle may appear different. Order this handle for
models listed here.). |
$9.14 |
|
|
|
72946 |
Shift lever for 1976-80 Merc 20 HP. |
$14.26 |
|
